ACO
Pit Accessories
Facebook
Twitter
Twitter
. About Us . ACO Group of Companies
. .
Local Sales Support
Home         
      1300 765 226 (AUS)   0800 448 080 (NZ)   + 61 2 4747 4000 (Export)   Contact ACO Online   


To facilitate the installation of cable enclosures along a cable route and to satisfy specific user requirements, a wide range of accessories is offered.

Accessories are designed to assist with installation, services identification, maintenance and keyhole/IP protection.

Polymer concrete pits and plastic pits may require different accessories. The table below will help guide your selection. If in doubt, contact ACO.

Universal plug
Universal plug allows lids
to meet IP rating IP4X
(AS 60529).
Lid & Access cover lifers
Range of lid & access cover lifters.
 
Diamond holesaws
Range of sintered diamond holesaws for polymer
concrete pits.
Pit lifter
NATA certified pit lifters for
Type 8, 96 & 99 polymer
concrete pits.

Accessories
 
Description
Polycreteregistration mark Pits
Plastic
Pits
Part
No.
Weight
(kg)
Pit Additions    
 
 
Pit divider angles
Hanger brackets
tick
tick
 
0.35
0.15
Steel Lid ID    
 
 
Brass plate - Electricity
Brass plate - Communications
Brass plate - Gas
tick
tick
tick
tick
tick
tick
0.05
0.05
0.05
PowerLok® Assembly    
 
 
PowerLokregistration mark bracket packet
tick
tick
0.80
Pit Maintenance    
 
 
Polymer concrete repair kit (1L)
PowerLokregistration mark tool (pg 20)
Cement concrete lid lifter
Universal short lifting key
Urbanfilregistration mark/Pavermateregistration mark: allen locking key
Rhinocastregistration mark: lifting key - short handle (pair)
Rhinocastregistration mark: lifting key - long handle (pair)
Rhinocastregistration mark: sealing grease 4kg
Rhinocastregistration mark: sealing grease 20kg
tick
tick
tick
tick
tick
tick
tick
tick
tick

tick
tick
tick
tick
tick
tick
tick
tick
1.40
0.20
1.15
0.40
0.25
3.60
8.10
4.40
21.80
Installation Devices    
 
 
Type 96 & 99 Certified pit lifter
Type 8 Certified pit lifter
Holesaw: sintered 95mm system - hex shaft
Holesaw: sintered 117mm system - hex shaft
Holesaw: sintered 127mm system - hex shaft
Holesaw: sintered 152mm system - hex shaft
Holesaw: sintered 180mm system - hex shaft
Holesaw: sintered 95mm system - SDS
Holesaw: sintered 117mm system - SDS
Holesaw: sintered 127mm system - SDS
Holesaw: sintered 152mm system - SDS
Holesaw: sintered 180mm system - SDS
tick
tick
tick
tick
tick
tick
tick
tick
tick
tick
tick
tick
 
6.10
12.00
0.90
1.25
1.30
1.85
1.95
0.85
1.35
1.35
2.00
2.55
Keyhole/IP Protection    
 
 
Universal plug
Urbanfilregistration mark/Pavermateregistration mark: round grey plastic caps
Urbanfilregistration mark/Pavermateregistration mark: round gold plastic caps
Rhinocastregistration mark: rectangular long red plastic caps
Rhinocastregistration mark: rectangular short red plastic caps
Rhinocastregistration mark: round red plastic caps
Bracket packets are standard for all PowerLok® lids. Items listed are for replacement purposes only.
Sintered diamond holesaws are not recommended for plastic pits. ACO recommends using any widely available bi-metal holesaw. If in doubt contact ACO.
Caps are supplied as standard for all Urbanfil®, Pavermate® & Rhinocast® covers. Items listed are for replacement purposes only.
Suitable for all non-locking lids.
tick
tick
tick
tick
tick
tick
tick
tick
tick
tick
tick
tick
negligible
negligible
negligible
negligible
negligible
negligible


Click here for installation details.
Click here for holesaw instructions.
Click here for cutting and joining pipe entries.
Click here for NBN compliant gaskets
Click here to download all details of this page
Click here to download pit lifters product data sheet

 
 

| Home | About Us | Local Sales Support | Contact |

© ACO AUSTRALIA 2014