ACO Drain - K100

KlassikDrain K100

	About Us		ACO Group of Companies

	Local Sales Support		Search:

Home

ACO Drain Home

1300 765 226 (AUS)

0800 448 080 (NZ)

+ 61 2 4747 4000 (Export)

Contact ACO Online

****JavaScript based drop down DHTML menu generated by NavStudio. (OpenCube Inc. - http://www.opencube.com)****

K100 is a 100mm (internal width) grated trench drain.

K100 features an integrally cast-in galvanised steel grate support rail which provides a discreet aesthetic wearing edge.

System loading dependent on grate loading.

KlassikDrain - System Layout

	Metre channels 0.6% sloped channels in metre lengths and 60 depths which connect to create 60 metre continuous sloped run. Neutral channels available in 7 depths. Can be assembled to produce constant depth runs, or inserted in sloped runs to increase their length.		End/DN100 inlet/outlet cap Fits all channels. Manufactured from grey ABS to complement edge rail. Guides aid cutting to correct height. Socket connection to DN100 pipes. Seal pipe to end cap using PVC-ABS cement. Note: For channels K1-K10, ACO recommends removal of socket to ensure adequate pavement material coverage. For channels K31-K60, two end caps are required. Cut second end cap, discard socket and glue to first end cap to the required height.

Half metre channel Neutral channels in 3 depths to supplement one metre channels.

K31-K60 channels To create up to a 60 metre continuous sloped run, an extension is attached to the top of the channel. Each channel comes complete with integrally bonded extension piece.		K900 in-line pit. In-line pit providing DN100 pipe connection through cast-in rubber 'O' ring when plastic insert is removed. Available with plastic rubbish basket. Any channel can be connected into the in-line pit by removing a section of the end wall to the correct height. Drill-outs guide this connection to channel K5, K10, K15, K20, K25 and K30. Not recommended for channel nos. K31-K60.	Series 600, Universal Junction Pit Universal pit with drill-outs for DN150 or DN225 pipe connection. Supplied complete with grate. Available with plastic rubbish basket . Any channel can be connected into the pit by removing a section of the end wall to the correct height. See further details on Series 600, Universal Junction Pit.

K100 Parts List

Description	Part	Invert Depth		Weight
	No.	(mm)		(kg)
		Female	Male

K100 Channel with galvanised rail

K01 Neutral channel - (1m) K1 Sloped channel - (1m) K2 Sloped channel - (1m) K3 Sloped channel - (1m) K4 Sloped channel - (1m) K5 Sloped channel - (1m) K6 Sloped channel - (1m) K7 Sloped channel - (1m) K8 Sloped channel - (1m) K9 Sloped channel - (1m) K010 Neutral channel - (1m) K0102 Neutral channel - (0.5m) K10 Sloped channel - (1m) K11 Sloped channel - (1m) K12 Sloped channel - (1m) K13 Sloped channel - (1m) K14 Sloped channel - (1m) K15 Sloped channel - (1m) K16 Sloped channel - (1m) K17 Sloped channel - (1m) K18 Sloped channel - (1m) K19 Sloped channel - (1m) K020 Neutral channel - (1m) K0202 Neutral channel - (0.5m) K20 Sloped channel - (1m) K21 Sloped channel - (1m) K22 Sloped channel - (1m) K23 Sloped channel - (1m) K24 Sloped channel - (1m) K25 Sloped channel - (1m) K26 Sloped channel - (1m) K27 Sloped channel - (1m) K28 Sloped channel - (1m) K29 Sloped channel - (1m) K030 Neutral channel - (1m) K0302 Neutral channel - (0.5m) K30 Sloped channel - (1m) K31 Sloped channel - (1m) K32 Sloped channel - (1m) K33 Sloped channel - (1m) K34 Sloped channel - (1m) K35 Sloped channel - (1m) K36 Sloped channel - (1m) K37 Sloped channel - (1m) K38 Sloped channel - (1m) K39 Sloped channel - (1m) K040 Neutral channel - (1m) K40 Sloped channel - (1m) K41 Sloped channel - (1m) K42 Sloped channel - (1m) K43 Sloped channel - (1m) K44 Sloped channel - (1m) K45 Sloped channel - (1m) K46 Sloped channel - (1m) K47 Sloped channel - (1m) K48 Sloped channel - (1m) K49 Sloped channel - (1m) K050 Neutral channel - (1m) K50 Sloped channel - (1m) K51 Sloped channel - (1m) K52 Sloped channel - (1m) K53 Sloped channel - (1m) K54 Sloped channel - (1m) K55 Sloped channel - (1m) K56 Sloped channel - (1m) K57 Sloped channel - (1m) K58 Sloped channel - (1m) K59 Sloped channel - (1m) K060 Neutral channel - (1m) K60 Sloped channel - (1m)	71507 04041 04042 04043 04044 04045 04046 04047 04048 04049 04072 04097 04050 04051 04052 04053 04054 04055 04056 04057 04058 04059 04074 71518 04060 04061 04062 04063 04064 04065 04066 04067 04068 04069 04076 71523 04070 71532 71546 71559 71568 71571 71584 71592 71603 71616 71628 71637 71644 71651 71665 71673 71681 71692 71709 71718 71726 71733 71742 71754 71765 71779 71782 71793 71805 71814 71827 71838 71842 71851	112 112 118 124 130 136 142 148 154 160 166 166 166 172 178 184 190 196 202 208 214 220 226 226 226 232 238 244 250 256 262 268 274 280 286 286 286 292 298 304 310 316 322 328 334 340 346 346 352 358 364 370 376 382 388 394 400 406 406 412 418 424 430 436 442 448 454 460 466 466	112 118 124 130 136 142 148 154 160 166 166 166 172 178 184 190 196 202 208 214 220 226 226 226 232 238 244 250 256 262 268 274 280 286 286 286 292 298 304 310 316 322 328 334 340 346 346 352 358 364 370 376 382 388 394 400 406 406 412 418 424 430 436 442 448 454 460 466 466 472	13.8 14.0 14.4 14.8 15.2 15.6 16.0 16.4 16.8 17.2 17.4 8.7 17.6 18.0 18.4 18.8 19.2 19.6 20.0 20.4 20.8 21.2 21.4 10.7 21.6 22.0 22.4 22.8 23.2 23.6 24.0 24.4 24.8 25.2 25.4 12.7 25.6 34.0 34.4 34.8 35.2 35.6 36.0 36.4 36.8 37.2 37.4 37.6 38.0 38.4 38.8 39.2 39.6 40.0 40.4 40.8 41.2 41.4 41.6 42.0 42.4 42.8 43.2 43.6 44.0 44.4 44.8 45.2 45.4 45.6

In-line drainage pit

K900 In-line pit - (0.5m) K900 QuickLok bar (removable) Series 900 plastic rubbish basket	04155 98717 01498	565 - -	565 - -	29.5 0.1 0.5

Universal junction pit

601 pit with Slotted DI grate (0.5m) 602 pit with Intercept DI grate (0.5m) Series 600 plastic rubbish basket	98009 98015 98653	849 849 -	849 849 -	98.1 100.9 1.3

Channel accessories

End/DN100 inlet/outlet cap QuickLok locking bar QuickLok grate removal tool 150mm oval to round adaptor	90509 02899 01318 00821	- - - -	- - - -	0.2 0.1 0.1 0.5

Notes:
1. Preformed drillout for DN100 or DN150 pipe on underside of every channel.
2. End cap can be cut down to suit all channels K31-K60, two end caps required.
3. See details for grates.
4. To calculate overall depth add 25mm to invert depth