Locate locking bar in wall recesses by rotating clockwise. |
K100/KS100
Use a hammer to tap bar into position, so that serated ends grip in recess.
K200/KS200/K300/KS300
Push plastic clips forward to lock bar into position. |
To install grate, align QuickLok pin directly over locking bar. |
Push down or stand on grate until it snaps into place. |
To remove grate, insert locking tool hook between slots and pull grate upwards, to snap free. Remainder of grates can be pulled out by hand - gloves are recommended. |
K100/KS100
To remove bar, insert screwdriver into hole at end of bar and lever back serrated end, rotate bar free.
K200/KS200/K300/KS300
Push plastic clips back to unlock, rotate bar free. |