Stainless Steel Line Drainage ACO Polycrete offers a variety of stainless trough and grating solutions. The systems comprise 1.2mm (minimum thickness) steel troughs and gratings, manufactured in grades 304 and 316 stainless steel. A variety of edge profiles and gratings are available to suit varying load requirements and surrounding floor finishes. Gratings may be locked for safety and security. • Grating and trough solutions in standard 100mm, 200mm & 300mm internal widths and in varying depths and configurations. ACO Line Drainage >> Custom Solutions • For applications requiring products to be manufactured in custom widths, sizes and other grades of steel, ACO can supply a total custom solution. • Grate & Frame, and matting. Stainless steel, push-fit pipe and fitting system for hygiene and corrosive environments. ACO PIPE™ is a range of push fit socketed waste pipe systems in thin wall stainless steel for above and below ground drainage applications. The ACO PIPE™ system provides a modern alternative to PVCu, aluminium and cast iron soil and waste pipes. Product Range • Socketed pipe profile with double lip seal for simple push-fit assembly • External diameters of 50mm, 75mm, 110mm and 160mm • Standard sections in 150mm, 250mm, 500mm, 750mm, 1000mm, 1500mm, 2000mm and 3000mmlengths • Custom lengths up to 6000mm available to order • Range of standard bends and branch units available ACO Pipe™>> Impact, high performance stainless steel waste water floor gullies with vertical or horizontal outlet EG150 floor gullies offer compact, high performance floor drainage solutions for a wide variety of applications. Product Range • Gullies with a 110mm dia vertical outlet spigot • Gullies with three, 32mm or 40mm diameters side inlet options • Gullies to suit vinyl, tile, epoxy and concrete floor finishes • Gullies with a membrane clamp for use with suspended floor slabs ACO Gully >> Home Page | CONTACT ACO NOW