ACO
ACO Stainless Drainage Run Online Request
ACO References Approvals & Accreditation
Education  
Home         


The following information is required to provide a recommendation for Trough & Grate systems. On receipt of this form, ACO will provide a recommendation. For more complex requirements, please contact ACO at +61 2 4747 4000.

All fields marked with an * are required:

*Project Name:
Project City:  State:

*Name:
*Email:
Company:
Address:
Suburb:
City
State: *Pcode:
Country:
*Phone:
Fax:

Please attach any drawings or documentation and send along with this online request.
(2MB max, Zip file preferred)

For ACO's standard template drawings, click here.

RUN 1:

1. LIQUID CHARACTERISTICS
Grade of stainless steel:   If 'Other', please specify:
Chemical resistance required:
Temp / Operating conditions:  If 'Other', please specify:

2. LOAD CLASS / SECURITY
Load Class:
Trough edge details:
Lockings required:


Type of application:
Type of project:
Traffic conditions:  Wheel loads (if known) : kg

3. VOLUME
Width:  If 'Custom', please specify: mm
Water volumes:  If 'Measured', please specify: l/s
Depth restrictions:
Min depth mm
Max depth mm
Trough invert:


Run length: mm
Number of Outlets:  If 'Other', please specify:
4. AESTHETICS & SAFETY
Grate type:  
Grate finish:
Do the grates need to comply to AS1428.2 Design for access & mobility - Part 2?


Do the grates need to be heel safe:
5. OUTLET TYPE
Vertical outlet to fit pipe size:  If 'Other', please specify:
Debris collection:

Click below to enter additional runs

RUN 2:

1. LIQUID CHARACTERISTICS
Grade of stainless steel:   If 'Other', please specify:
Chemical resistance required:
Temp / Operating conditions:  If 'Other', please specify:

2. LOAD CLASS / SECURITY
Load Class:
Trough edge details:
Lockings required:


Type of application:
Type of project:
Traffic conditions:  Wheel loads (if known) : kg

3. VOLUME
Width:  If 'Custom', please specify: mm
Water volumes:  If 'Measured', please specify: l/s
Depth restrictions:
Min depth mm
Max depth mm
Trough invert:


Run length: mm
Number of Outlets:  If 'Other', please specify:
4. AESTHETICS & SAFETY
Grate type:  
Grate finish:
Do the grates need to comply to AS1428.2 Design for access & mobility - Part 2?


Do the grates need to be heel safe:
5. OUTLET TYPE
Vertical outlet to fit pipe size:  If 'Other', please specify:
Debris collection:

RUN 3:

1. LIQUID CHARACTERISTICS
Grade of stainless steel:   If 'Other', please specify:
Chemical resistance required:
Temp / Operating conditions:  If 'Other', please specify:

2. LOAD CLASS / SECURITY
Load Class:
Trough edge details:
Lockings required:


Type of application:
Type of project:
Traffic conditions:  Wheel loads (if known) : kg

3. VOLUME
Width:  If 'Custom', please specify: mm
Water volumes:  If 'Measured', please specify: l/s
Depth restrictions:
Min depth mm
Max depth mm
Trough invert:


Run length: mm
Number of Outlets:  If 'Other', please specify:
4. AESTHETICS & SAFETY
Grate type:  
Grate finish:
Do the grates need to comply to AS1428.2 Design for access & mobility - Part 2?


Do the grates need to be heel safe:
5. OUTLET TYPE
Vertical outlet to fit pipe size:  If 'Other', please specify:
Debris collection:

RUN 4:

1. LIQUID CHARACTERISTICS
Grade of stainless steel:   If 'Other', please specify:
Chemical resistance required:
Temp / Operating conditions:  If 'Other', please specify:

2. LOAD CLASS / SECURITY
Load Class:
Trough edge details:
Lockings required:


Type of application:
Type of project:
Traffic conditions:  Wheel loads (if known) : kg

3. VOLUME
Width:  If 'Custom', please specify: mm
Water volumes:  If 'Measured', please specify: l/s
Depth restrictions:
Min depth mm
Max depth mm
Trough invert:


Run length: mm
Number of Outlets:  If 'Other', please specify:
4. AESTHETICS & SAFETY
Grate type:  
Grate finish:
Do the grates need to comply to AS1428.2 Design for access & mobility - Part 2?


Do the grates need to be heel safe:
5. OUTLET TYPE
Vertical outlet to fit pipe size:  If 'Other', please specify:
Debris collection:

RUN 5:

1. LIQUID CHARACTERISTICS
Grade of stainless steel:   If 'Other', please specify:
Chemical resistance required:
Temp / Operating conditions:  If 'Other', please specify:

2. LOAD CLASS / SECURITY
Load Class:
Trough edge details:
Lockings required:


Type of application:
Type of project:
Traffic conditions:  Wheel loads (if known) : kg

3. VOLUME
Width:  If 'Custom', please specify: mm
Water volumes:  If 'Measured', please specify: l/s
Depth restrictions:
Min depth mm
Max depth mm
Trough invert:


Run length: mm
Number of Outlets:  If 'Other', please specify:
4. AESTHETICS & SAFETY
Grate type:  
Grate finish:
Do the grates need to comply to AS1428.2 Design for access & mobility - Part 2?


Do the grates need to be heel safe:
5. OUTLET TYPE
Vertical outlet to fit pipe size:  If 'Other', please specify:
Debris collection:


FEEDBACK REQUIRED FROM ACO
1. Custom design(s) & quote
2. Please contact me to discuss


Other Information:

All information to be provided by ACO Polycrete Pty Ltd is provided in good faith with the belief that the information used is correct and that any assumptions made are valid. It is the specifier’s responsibility to check and confirm that any information provided is acceptable and suitable for use.

 
| Home | About Us | Local Sales Support | Contact |
© ACO AUSTRALIA 2007